Cabinets That Look Refinished, Not Just Touched Up
Cabinet painting and staining in Galena for kitchens where old grease and buildup sit underneath every previous coat
Solid wood cabinets in older kitchens across Galena and Dubuque carry decades of cooking grease, hand oils, and layered finishes that cause new paint to peel or stain to blotch unless the surface is properly degreased and scuffed first. Doors and drawer fronts are removed, labeled, cleaned to bare wood or stable finish, then sanded to dull the sheen so primer can bond. American Shield Painting handles cabinet refinishing with the same prep-first approach used on walls and trim, and the owner is on site to walk you through finish options and help you choose between paint and stain based on the condition of the wood.
Cleaning removes grease and residue using a degreaser strong enough to cut buildup but safe for wood, and sanding follows to smooth the surface and remove any remaining gloss. Holes, dents, and gaps are filled, a bonding primer is applied, and finish coats go on in thin layers to avoid drips or sags in panel profiles and door edges.
Arrange an in-home consultation to review your cabinets and discuss color, sheen, and finish durability.
How Prep Affects the Finished Surface
Skipping the cleaning and sanding steps leaves grease and slick finish underneath new coats, which causes paint to lift or stain to absorb unevenly, especially on door fronts and drawer faces near the stove or sink where oils accumulate most heavily. Proper degreasing and scuffing create a surface that accepts primer uniformly, so the finish coat dries smooth and adheres long-term.
Once the cabinets are rehung, you'll see doors and frames with even color and sheen from edge to edge, panel profiles without drips or buildup in grooves, and drawer fronts that match in tone and texture.
Surfaces that were previously sticky or yellowed appear clean and uniform, and door edges no longer show layered coats of old finish.
The work includes door and drawer removal, cleaning, sanding, filling, priming, finish coats, and reinstallation, but does not cover hardware replacement or hinge repair—those are handled separately if needed.
Questions Before Starting Your Project
Refinishing cabinets involves decisions about prep depth, finish type, and how long the kitchen will be out of use, especially in older homes where the existing finish may be unknown.
How are doors and drawer fronts prepared before finishing?
Each piece is removed and labeled, cleaned with a degreaser to remove oils and residue, then sanded to dull the existing finish and create a surface that primer can bond to without peeling or flaking later.
What gets filled during the prep process?
Dents, scratches, nail holes, and gaps where joints have opened are filled with wood filler, sanded flush once dry, and primed so the finish coat shows a smooth, continuous surface rather than highlighting imperfections.
Why use a bonding primer instead of going straight to paint?
Bonding primer adheres to slick or previously finished surfaces and creates a stable base for topcoats, which prevents new paint from lifting or stain from absorbing unevenly, especially on cabinets with multiple layers of old finish.
What is the difference between painting and staining cabinets?
Paint provides opaque, uniform color and hides the wood grain entirely, while stain penetrates to enhance grain and color but requires the wood to be in good condition without deep scratches or patched areas that would show through.
What will the cabinets look like once they're back in place?
Doors and drawer fronts will show consistent color and sheen without streaks or brush marks, edges and corners will appear crisp, and surfaces that were previously sticky, yellowed, or stained will look clean and refinished rather than simply recoated.
American Shield Painting also
paints and stains cabinets in East Dubuque, Dubuque, Freeport, Elizabeth, and Lancaster. The owner has about seven years of painting experience and four years running his own company. Request an estimate to review your kitchen and plan the refinishing process.
